Turn word wrap on


Step 1: Make a new folder in the root folder of your harddisk drive. make sure it has no spaces.
e.g. C:\BootLoader\
don't use something like C:\Boot Loader\ as it contains spaces.
* NOTE: Having spaces in the folder containing the rom file will cause an error to show because it can't send the file to the device.*


Step 2: Download the WM6 rom and my bootloader into the folder you just created in step one.
Rom: WM6_4700_0_7_0_FIXED.rar
BootLoader: BootLoader.exe.
* NOTE: Don't download them into another folder that has spaces, put them in the folder from step one.*


Step 3: Put your hx4700 in bootloader mode by pressing ITASK+CONTACTS+RESET, And put it in the sync cradle.
* NOTE: It's best to charge your iPAQ or have power connected before you perform the rom upgrade.*


Step 4: Open the BootLoader.exe from the folder, and select the 'WM6_4700_0_7_0_FIXED.rar' file when it asks you to select a rom file.
It will automatically find and extract the nbf file, remove the header, close activesync, then start uploading it to your device.
* NOTE: You may need to put on a pot of coffee, it takes a while. It will show an error after uploading it, and stay in bootloader mode, but it will still work once you apply step 5.*


Step 5: Lastly, perform a clean reset by pressing CONTACTS + INBOX + RESET. When asked to confirm the clean reset press CALENDER.
* NOTE: You may need to soft reset before or after doing this. This step is required by all bootloaders. (Solnyshok’s mod etc.) Don't skip it or it will not boot up.*

Note: If using Windows Vista, You will need to install special drivers. A dialog box will prompt you to install them automatically if it detects you are running vista.